Citristrip

What is a lemon stripe?

| 1/2 gallon lemon strips. The safest paint and varnish stripper gel removes paint layers, both latex paint and oil paint. It is also effective for removing paint, shellac and epoxy in one step. The stripper has a pleasant citrus scent and is biodegradable. Above all, it is safe for indoor use.

And what do you get after the Citristrip?

Use a clean sanding pad soaked in Citristrip® Post Wash Remover or KleanStrip® odorless white spirit to loosen any remaining stubborn paint particles. If the wood appears clear, clean the surface of all residues after washing with a soft cloth soaked in Citristrip® Stripper.

Can I also use Citristrip at home?

Start working in a well-ventilated area. The Citristrip container says you can use it indoors, but if you do, turn on a fan and open a window.

And how is Citristrip used?

Step 1 Apply generously. CitriStrip needs a thick coating to function effectively.
Step 3 Sit down. The duration will certainly depend on the number of coats of paint and the type of coating you want to remove.
Step 4 Scrape it off. Once your working hours are over, you can start scratching.
Step 5 cleaning.

How long do I have to leave the Citristrip in place?

When I read the label on the package I see that it is necessary to leave the Citristrip on the target for 30 minutes. up to 24 hours.

How to clean after using CitriStrip?

Use a clean sponge with Citristrip® Paint Stripper After Wash to loosen the remaining surface and remove any residue. The surface must be perfectly clean and dry before painting.

How to neutralize wood after stripping?

How to neutralize traces of paint

Should I use a mineral liquid after stripping?

After removing the furniture, you will need something to dissolve the residue from the surface and the mineral liquid (the odorless one) will help you with this. You can also use it after washing. Now use the brush (if it’s a small area or use a larger brush on a larger piece of furniture) and simply go through each section.

How do you use turpentine after stripping?

Slightly dampen part of a cloth with mineral liquid. Do not moisten the cloth. Wipe the damp part of the cloth along the surface you just removed. When working with wood, follow the grain, not against it.

Does Citristrip need to be neutralized?

Ultimately, you are not looking to neutralize Citristrip, but rather to remove it. If you see the absolute preferred way, the company that makes Citristrip also makes a Citristrip cleaner specifically designed to remove Citristrip.

How do I clean the wood after stripping?

When the part has been completely removed from the wood and you are satisfied, you can start cleaning. Thoroughly clean the part with steel wool and water or paint thinner, depending on the stripper used, and make sure any paint stripper residue has been removed.

Does Citristrip remove stains?

But does Citristrip remove stains?

YUP! It can and will remove old stains. It can even remove paint from wooden furniture!

How do I remove the residue after peeling off the paint?

Steel wool is the best way to remove stains from flat, round and easily accessible areas. Dip the medium-fine steel wool (O) in the chemical stripper and try to scrub the remaining surface. If necessary, repeat the removal process with another remover application.

Can you wash the Citristrip at high pressure?

If using a wood pressure washer, wait at least a few weeks before painting in hot, dry weather. The pressure washer presses water into the wood and must dry. Otherwise the color will not last. (Voice of a sad experience here.)

Is Citristrip water soluble?

Citristrip is water soluble.

Does the citrus strip work?

Citrus fruits are generally one of the worst finishers. It works quite slowly and does an incomplete job. It usually takes several uses to completely remove a finish. The fastest stripper is the one that contains methylene chloride and will do the most thorough job.